Tassimo Charmy T55 descaling

TASSIMO CHARMY (T55) opal black 1Learn here how to descale your Tassimo Charmy T55, you can download the instructions manual or see the descaling video how to descale. TASSIMO CHARMY T55 adds a award-winning design style to your home. Its outside beauty and with the state-of the-art Intellibrew™ technology on the inside this machine makes a perfect cup every single time.

In addition to all the standard TASSIMO features, TASSIMO CHARMY T55 also offers an very advanced water filtration system and a setting that lets you adjust strength for your ultimate drinking pleasure.

If you like good coffee, hot chocolate or tea and if you appreciate a good design and like to try new flavours, then TASSIMO CHARMY is the perfect one for you.

Download Tassimo Charmy T55 manual

Read below how to descale your Tassimo Charmy T55

    • descaling step 1

      Step 1/23

      Remove the water tank from the back of the machine.
    • descaling step 2

      Step 2/23

      Remove the orange Service T DISC from the compartment at the back of the machine.
    • descaling step 3

      Step 3/23

      Fill the water tank up to the descaling mark (500ml) and add the descaling agent according to the manufacturer’s instructions. To find out more about descaling solution click here. Ensure that the descale agent is fully dissolved in the water before continuing.
    • descaling step 4

      Step 4/23

      Replace the water tank by tilting it slightly and returning it to its original position until it clicks into place.
    • descaling step 5

      Step 5/23

      Open the brewing unit by lifting the handle and pushing up. Place the Service T DISC on the T DISC holder with the barcode facing down. Close the brewing unit by first bringing it down and then push the handle firmly to the machine until you hear an audible click.
    • descaling step 6

      Step 6/23

      Place a suitable container (min. 500ml/ 17oz.) under the drink outlet.
    • descaling step 7

      Step 2/23

      Press and hold the Start/Stop button for at least 5 seconds to start the coffee machine descaling program.
    • descaling step 8

      Step 8/23

      The descaling program now starts and the ‘Descale and Status’ lights flash. The descaling process takes around 20 minutes while the solution is pumped through the system at intervals, and then runs into the container until the water tank is almost empty. A little liquid is always left in the tank. Note: If the process takes less than 20 minutes, you may have run a cleaning cycle by mistake – the coffee machine will not be fully descaled and the red descale icon will remain illuminated. If this occurs go back to step 6.
    • descaling step 9

      Step 9/23

      The Status light comes on after 20 minutes to indicate that the first stage of the process is complete.
    • descaling step 10

      Step 10/23

      Empty the container of used descale solution and place back under the drink outlet of the machine.
    • descaling step 11

      Step 11/23

      Remove the water tank from the back of the coffee machine.
    • descaling step 12

      Step 12/23

      Rinse the water tank thoroughly to remove traces of descale solution.
    • descaling step 13

      Step 13/23

      Refill the water tank with cool fresh water, up to the MAX mark.
    • descaling step 14

      Step 14/23

      Replace the water tank by tilting it slightly and returning it to its original position until it clicks into place. Open and close the brewing unit, leaving the Service T DISC in the T DISC holder.
    • descaling step 15

      Step 15/23

      Replace the empty container beneath the drink outlet.
    • descaling step 16

      Step 16/23

      Press the Start/Stop button briefly to run the cleaning cycle.
    • descaling step 17

      Step 17/23

      During the cleaning cycle, the orange Status light will flash and the coffee machine dispenses hot water into the container.
    • descaling step 18

      Step 18/23

      When the cleaning process is complete, empty the container and return it under the outlet. Complete steps 15 to 18 four times to ensure all the descale solution is flushed from the machine.
    • descaling step 19

      Step 19/23

      Open the brewing unit and remove the Service T DISC.
    • descaling step 20

      Step 20/23

      Replace the Service T DISC into the storage compartment at the back of the machine.
    • descaling step 21

      Step 21/23

      Refill the water tank with cool fresh water, up to the MAX mark.
    • descaling step 22

      Step 22/23

      Replace the water tank by tilting it slightly and returning it to its original position until it clicks into place.
    • descaling end

      Step 23/23

      Your TASSIMO has now been descaled and is ready for use again

Leave a Reply

css.php